Home improvement carpentry commonly used materials

The list of woodworking decoration materials mainly includes: woodworking boards, triangular boards, installation panels, wood glue, core boards, camphor veneer panels, gypsum boards, wood moldings, grain nails, // straight nails, rigid row nails, T-type nails , Silent drawer guide rails, middle curved hinges, wall nails, plastic steel gussets (integrated gussets), 4-inch stainless steel hinges, locks, handles, hardware.

1. Blockboard: Blockboard is the most widely used in woodworking, and it is also the most likely to cause formaldehyde pollution. According to different thicknesses, it can be divided into 4 types: 16, 19, 22, and 25 mm.

2. Panel: also called decorative panel, mainly used for surface decoration of carpentry work, with a thickness of about 3mm. It is a high-end decorative panel commonly used at present.

3. Plywood: also called three-layer board and five-layer board. The production process is basically the same as that of the panel, but the smoothness of the surface is not as good as that of the panel. It is generally used for mixed oil panels or backboards for carpentry.

4. Density board: also called fiberboard, is a wood-based panel made of wood fiber. There are three common types, one is high-density fiberboard, the other is medium-density fiberboard, and the third is low-density fiberboard. cupboard.

5. Particleboard: This is a thin board made of wood scraps as the main material. It is divided into two types: extruded and flat-pressed particleboard. It is cheap but has poor hardness. It is only suitable for places with small bearing capacity.

6. Fireproof board: The use of fireproof board is getting wider and wider, and it is generally used to make door panels. This kind of material has a clear grade, and the price is between 300 and 600 yuan. You can buy it according to your needs.

Methods of woodworking decoration materials:

1. Check whether the material meets the environmental protection standard. When purchasing woodworking and decoration materials, you must first check whether they are environmentally friendly. According to regulations, the formaldehyde emission of indoor building materials must be less than or equal to 1.5 mg per liter. If it exceeds 5 mg per liter, it is substandard.

2. Look at the moisture content of the wood. The moisture content of wood is an important factor in the deformation of furniture, because when the moisture content of wood is high, it will shrink and deform in a dry environment. When the water content is too low, it will absorb moisture and expand in the living room. In short, it is best to have a moisture content similar to that of the environment.

3. When purchasing, you should go to the regular building materials market to purchase. It is best to consult professionals or be accompanied by a special person to purchase. You should not try to buy cheap wood. Because cheap wood may have the same appearance, but the inner material will be very different, and the life of the furniture will be shortened.