How to lay tiles on silicon calcium board?

Steps for tiling tiles on silicon-calcium board partition walls:

1. Cut the tiles to the appropriate size.

2. Put cement on the partition wall of calcium silicate board.

3. Stick the tile on the place where the cement is touched, and support it with your hands for 2 seconds.

The stability of the gypsum board is not good, and it is greatly affected by the environment and time, and it is easy to deform. This is the biggest problem for laying tiles on the gypsum board partition wall.

To paste ceramic tiles on the gypsum board partition wall, the gypsum board must be firm before construction.

When laying tiles, it should be placed on the surface of the gypsum board cement board, and then plastered on the cement board, and then the tiles should be laid. The gaps between the tiles should be thin and even, and waterproof treatment should be done in places where there is often water.

It is best not to attach tiles to drywall partitions. Glue cement strakes or something to the drywall wall for added stability.

The strength and characteristics of the gypsum board must also be certain, and the tiles selected should not be too heavy, which will increase the burden on the gypsum board and reduce the service life of the gypsum board.

Is calcium silicon board the same as laminated panel?

1. The laminated board has a layered structure, mainly including a pattern layer, a bottom paper layer and a decorative layer. The veneer panel is made of new technology. During installation, it is not necessary to use edge banding strips, which can reduce installation costs, and can also avoid unevenness at the splicing point, and will not cause unevenness during use due to the unevenness of the splicing point. Inconvenient, in addition to the overall effect, but also elegant.

2. Calcium silicon board, also known as gypsum composite board, is a porous material with good sound insulation and heat insulation performance. It can attract water molecules in the air when the indoor air is humid; when the air is dry, it can release water molecules. , can properly adjust the indoor dryness, humidity, and increase comfort. Gypsum products are also special-grade fireproof materials, which can produce endothermic reactions in flames, and at the same time, release water molecules to prevent the spread of fire, and will not decompose to produce any toxic, corrosive, and suffocating gases, nor will they produce any combustibles or fumes.